Kodiak 700 EPS (valikus ka tänavalegaalne)

Gives a more unique appearance to the unit

• Hub caps can be ordered to fit the wheel
• Air valve is not included
• OEM part 

• Ideal to take your essencials for the ride or the job.
• Made of durable, high quality and low-density polyethylene
• Water and dust-resistant
• 66L capacity
• 33cc can holders for use during the trail
• Designed to mount on stock rack and includes installation hardware
• Mounting location for flag or whip
• Combine it with the optional Front Cargo Box for added luggage and storage capacity 

• Additional extension to the standard rear rack to keep your belongings secured.
• Made of bent steel tubing for strenght and durability
• Extends rear rack height to 190mm
• Easy to install to stock racks, using included hardware
• Compatible with optional Gun Boot Mount, Cooler Box Carrier and Rear Rack Bag 

• Additional extension to the standard front rack to keep your belongings secured.
• Made of bent steel tubing for strenght and durability
• Extends front rack height to 150mm
• Easy to install on stock racks, using included hardware
• Compatible with optional Gun Boot Mount, Cooler Box Carrier and Front Rack Bag 

• Offers rider comfort in cold weather conditions, particularly when riding.
• Simple plug-and-play design — no cutting, splicing or crimping of wires
• Four temperature settings: Off, Low, Medium, and High
• Compatible with optional Heated Grips 

• Ideal to take your essencials for the ride or the job.
• Made of durable, high quality and low-density polyethylene plastic
• Water and dust resistant; sealed lids use rubber ball and socket straps
• 37L capacity
• 33cc can holders for use during the trail
• Designed to mount on stock rack and includes installation hardware
• Combine it with the optional Rear Cargo Box for added luggage and storage capacity 

• Allows the usage of a standard ball mount to tow a small trailer.
• Accepts 2" receiver and standard hitch pin
• Easy bolt-on of ball mount 

• Highly increase your riding comfort.
• Special molded rubber grips for great feel
• Even and consistent heat distribution from unique flex-circuit technology
• Totals 40 watts and draws less than 3 amps
• By Heat Demon 

• Secures your personal belongings when venturing out in your Yamaha.
• Made of strong and durable high quality plastic
• Water and dirt resistant seal and design
• Two cam-over elastic latches which can be locked with padlocks
• Solid mounting system that works with most Utility ATV racks
• Combine it with the optional Front Storage Box for additional luggage capacity 

• Secures your personal belongings when venturing out in your Yamaha.
• Made of strong and durable high quality plastic
• Water and dirt resistant seal and design
• Two cam-over elastic latches which can be locked with padlocks
• Solid mounting system that works with most Utility ATV racks
• Combine it with the optional Rear Storage Box for additional luggage capacity 

• Bracket with pin on top. The most convenient way to secure your gun boot.
• Reinforcement strap tightly secures the boot in place when riding in rugged terrain
• Allows to remove the bottom end of the gun boot without sliding it out of the mount
• Suitable for both the optional available Gun Boot and Deluxe Gun Boot 

Gives a more unique appearance to the unit
Features

• Hub caps can be ordered to fit the wheel
• Air valve is not included
• OEM part 

• Ultimate added protection for footwells and fenders of your Yamaha.
• Prevent scratches to your Yamaha from trail obstacles
• Require and mount directly to the optional Heavy Duty Front Brush Guard and Heavy Duty Rear Grab Bar 

• Tough, aggressive look and a custom design that helps to protect your Yamaha from water, mud, and other trail debris.
• Made of strong, durable Thermoplastic Olefin (TPO) which is wider at the base to deflect more trail debris
• Overfenders follow the fender lines to create seamless, unified body lines 

• Increased protection for your Yamaha's front end, fenders and headlights.
• Durable bent steel tubing construction
• Designed to integrate with the design of your Yamaha
• Adds a tough, aggressive look
• Direct replacement for stock front grab bar, using stock mounts and hardware 

• Highly improve the rider's confort in cold weather conditions.
• Three-position switch: Off, Low, High
• Simple plug-and-play design — no cutting, splicing, or crimping of wires
• Easy clamp installation — no grip glue needed
• Low power consumption — draws less than 3 amps while in use 

• Designed to protect the taillight and total rear end of your Yamaha.
• Made of durable bent steel tubing
• Replaces rack support bars
• Includes mounting points for auxiliary lights 

• Durable protection for tight approaches, high stumps or rocks on the trail.
• Does not affect the approach angle
• Constructed of 5052 brushed aluminium
• Replaces stock front plate for a nice finishing
• Compatible with stock and optional front Grab Bars and optional winches available
• Combine it with the optional Middle and Rear Bash Plate for added protection 

• Durable protection for tight approaches, high stumps or rocks on the trail.
• Replaces stock front plate for a nice finishing
• Constructed of 5052 brushed aluminium 

• Provides protection from wind and trail debris..
• Tough, durable and shatter-resistant Polycarbonate
• Enhanced comfort for the rider, especially in bad weather conditions
• Easily removable, after initial installation
• Tilt is adjustable
• Offers protection to rider's hands, chest and head
• With headlight cut-out 

• A helpful back-up for vehicle recovery and moving lighter loads.
• 12.7m long and 4mm thick wire rope with roller fairlead
• Fully sealed motor and drivetrain to keep the elements out
• Differential planetary gear train
• Dynamic brake
• Permanent magnet motor
• High-strength composite gear housing and all-metal gears
• Capable of pulling 907kg
• Includes handlebar-mounted mini-rocker control 

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products. Applicable to European markets only. 

Enhances sight in low-light conditions with LED technology.

• Weather-resistant rubber body shield
• 30 degrees beam
• Frosted lens
• 9 watts
• Powerful LED spot light with 18 leds
• Easy installation
• Easy installation using strong ThreeBond® adhesive for a permanent mount
• Easy installation with included hardware
• Powerful spot light
• Ram mount with U bolt for rail mount included
• 12 volt output socket included
• Easily detachable from ram mount
• Rubber ball absorbs shock and vibration
• On/off switch on the light
• Length of power cord is 125 cm - 175 cm
• 4500K colour temp
• 1900 lumens 

Replacement synthetic rope for your optional WARN® winch.

• 15m long
• Flexible, easy-to-handle and lightweight synthetic rope
• Good alternative to wire rope
• Quick replacement process 

• Synthetic replacement rope for the optional WARN® Vantage 3000 and WARN® Provantage 2500/ 3500 winches
• Replaces steel wire for synthetic rope
• Includes synthetic rope, rock guard sleeve and roller fairlead 

Roto-molded, double-wall construction with attached flip-up lid. Easily removed and portable using the attached handle plus it is stack-able for easy storage. 8.4 liter capacity. Includes necessary mounting hardware to install on either the left or right side. Fits all the Drive2 cars. Note: Will not work side by side with sand bottle.
The finishing touch for your golf car! 

Yamaha- branded valve cap in black color.
Billet aluminium valve cap with Yamaha logo
Available in 3 colors: black, blue and red

Product Details

Offers heated grips and heated thumb on ATV units

• Plug and play installation
• One adhesive-backed silicone thumb warmer
• Fits 22mm handlebars
• Customisable heat levels for each thumb
• Includes two heated clamp-on grips
• Quad Zone controller offers five levels of heat
• Maximum 45 watts (20 per grip, 5 per thumb warmer) at 14 volt

• Gives a more unique appearance to the unit
• Hub caps can be ordered to fit the wheel
• Air valve is not included
• OEM part 

• Gives a more unique appearance to the unit
• Hub caps can be ordered to fit the wheel
• Air valve is not included
• OEM part 

A helpful back-up for any unexpected situation such as medium sized vehicles recovery or moving loads.
17m long and 5mm thick steel wire rope and plough roller fairlead
Hook, tie rods and body feature attractive, durable corrosion-resistant black finishing
Mini-rocker control switch with plug for corded remote
Three-stage planetary gear train for smooth, efficient operation
Ergonomic clutch handle
Patented roller disc brake for outstanding control while winching
Fully sealed to keep the elements out
All-metal gear housing and gears
Capable of pulling 1,133kg 

• Durable protection for tight approaches, high stumps or rocks on the trail.
• Made of lightweight brushed aluminium
• Replaces stock middle plate for a nice finishing
• Constructed of 5052 brushed aluminium
• Combine it with the optinal Front and Rear Bash Plate for added protection 

• Durable protection for tight approaches, high stumps or rocks on the trail.
• Adds protection to the rear main frame
• Made of lightweight aluminium
• Replaces stock rear plate for a nice finishing
• Constructed of 5052 brushed aluminium
• Combine it with the optional Front and Middle Bash Plate for added protection 

• Improved durable protection during tight approaches and during high stumps or from rocks on the trail.
• Replaces stock front plate for a nice finishing touch
• Constructed of 5052 brushed aluminium 

• Soft fender bag providing additional storage for your ATV.
• Soft-sided design
• Full length zipper for easy access
• External straps for additional attachments
• Features Yamaha logo 

• A thin & flexible seat heater, that installs underneath stock seat cover and warms quickly
• Foam cover measures 305mm x 254mm
• Includes on/off switch
• Heater measures 254mm x 229mm
• Controller included
• ATV 4 zone grip heaters are sold separately 

• Keeps riders thumbs warm in the cold weather.
• One adhesive-backed silicone thumb warmer
• The warmer features a simple hi/lo/off operation
• Plug and play 

• Yamaha-branded valve cap
• Billet aluminium valve cap with Yamaha logo
• Available in 3 colors: black, blue and red 

Yamaha-branded valve cap
Billet aluminium valve cap with Yamaha logo
Available in 3 colors: black, blue and red 

• Improved air flow and filtration.
• Can be cleaned with water and soap
• Pre-oiled with bio-degradable oil